Anaheim Gate Pros provides professional welding & gate fabrication in Anaheim, CA for residential and commercial properties across Orange County. We run our own metal shop, which on Anaheim jobs matters for a plain reason. Almost nothing here is a standard size, and almost nothing can be carried in through the property finished.
Openings on these streets have been through sixty years of curb repair, slab replacement and settling, so the gap between posts is rarely what a catalog calls it and is often out of square by an inch or more. We measure the actual opening, build the leaf to it, and adjust hardware so the gate hangs plumb even when the posts do not.
Measuring an old opening is its own skill. We take the width at the top, at the middle and at the apron, check both posts for plumb in two directions, and shoot the grade across the threshold, because sixty years of settling rarely moves things evenly. Those five numbers decide whether the leaf is built square with the hardware shimmed, or built deliberately out of square so the gap reads even to somebody standing at the curb.
Access shapes the build as much as the design does. A finished sixteen-foot panel cannot be walked down a three-foot side yard or turned into a courtyard, so we plan the joints, fabricate in sections that fit the route, and complete the welds on site with the leaf supported in position. A splice planned at a rail intersection disappears; one planned mid-picket never quite does.
Shop capability covers wrought iron and ornamental steel, aluminum, frames for wood and composite cladding, posts and pilaster cores, custom hinges and latch hardware, monograms, pedestrian gates and laser-cut panels. Everything is welded and dressed rather than bolted, and everything is blasted, primed and powder coated inside and out before it leaves us. Pilaster cores and operator brackets get fabricated alongside the leaf so they actually fit it.
Mobile repair welding is a large part of the work. Straightening a frame that met a bumper, cutting out and replacing rusted bottom rails, re-welding hinge stiles, adding internal bracing to a leaf that has begun to rack, and widening or narrowing a gate after a driveway has been repoured. Most of that work happens on site with the leaf hanging where it already is.
We also fabricate the pieces no catalog sells: a hinge post shaped to clear a utility box, a bracket that lets an operator mount in a narrow side yard, a section of picket to match a fence nobody makes anymore. Bring us a photograph and a measurement and we can usually match it. That includes a picket profile that has to be rolled rather than bought from a catalog.
With 15+ years of experience, our insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, powder-coated aluminum gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Anaheim and nearby communities including Santa Ana, Fullerton, Orange, Garden Grove.
What We Handle
Everything our welding & gate fabrication in Anaheim covers
One crew, one point of contact, and the full range of welding & gate fabrication work in Anaheim, CA. If it is on this list we do it in house rather than handing it to a subcontractor:
- custom gate fabrication
- on-site mobile welding
- structural gate repair
- gate frame re-welding
- metal fabrication shop
- post and hinge welding
- gate bracket and hardware fabrication
- railing and gate welding
- cracked weld repair
- mobile welding service
- custom hinge plate fabrication
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Anaheim services.
Materials, equipment and how we do welding & gate fabrication
The difference between welding & gate fabrication that lasts and welding & gate fabrication that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with wrought iron and ornamental steel fabrication, powder-coated aluminum gates, cantilever and roller slide gates, LiftMaster, DoorKing and FAAC operators, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Anaheim job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of gate work in Orange County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do welding & gate fabrication outside Anaheim
Anaheim Gate Pros covers Anaheim and the surrounding communities of Orange County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Welding & Gate Fabrication in Santa Ana, CA — Orange County, population 310,000
- Welding & Gate Fabrication in Fullerton, CA — Orange County, population 140,000
- Welding & Gate Fabrication in Orange, CA — Orange County, population 140,000
- Welding & Gate Fabrication in Garden Grove, CA — Orange County, population 170,000
- Welding & Gate Fabrication in Irvine, CA — Orange County, population 310,000
- Welding & Gate Fabrication in Huntington Beach, CA — Orange County, population 195,000
Start on the Anaheim Gate Pros homepage for a free estimate, or call (877) 680-6876 and describe the job.
Why Anaheim Chooses Anaheim Gate Pros
- ✓Over 15 years installing and automating gates across Orange County
- ✓In-house metal shop — we weld and powder coat our own gates, not drop-ship them
- ✓Residential and commercial, from a single swing gate to an HOA cantilever install
- ✓Every operator wired to UL 325 with photo eyes, loop detectors and tested entrapment protection
The standards behind welding & gate fabrication
Quality here is not a matter of opinion — it is written down. The welding & gate fabrication work we do in Anaheim follows published industry standards: DASMA is the standards body for door and access systems, and UL Solutions publishes UL 325, the safety standard for automatic gate operators. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every welding & gate fabrication project in Anaheim gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (877) 680-6876 for a free welding & gate fabrication free estimate in Anaheim, or request a quote and we'll get right back to you.